MOLYBDENUM PLATE
Material from .090 inches to 3 inches in thickness is classified as molybdenum plate. It is widely used in the construction of furnace tooling and parts and as a feed stock for the fabrication of parts for the electronics and semiconductor industries. Standard availability is described below. Other sizes and tolerances are available.
Thickness |
Max. Width |
Max. Length |
.090" |
24" |
110" |
.125" |
24" |
80" |
.250" |
24" |
40" |
.500" |
24" |
24" |
>.500" |
24" |
|
For greater thickness, plate products are normally limited to 40 kilograms maximum weight per piece.
Molybdenum Plate Standard Thickness Tolerance
Thickness |
.25" to 6" |
6" to 12" |
12" to 24" |
.090" |
± .005" |
± .005" |
± .005" |
> .125 |
± 4% |
± 4% |
± 4% |
Molybdenum Plate Standard Width Tolerance
Thickness |
.25" to 6" |
6" to 12" |
12" to 24" |
.090" |
± .031" |
± .031" |
± .031" |
> .125 |
± .062" |
± 062" |
± 062" |
Surface Condition
Surface can be supplied in a shiny, matte, or as-rolled condition; dependent upon thickness and width parameters.
Heat Treatment
Molybdenum flat products are rolled and annealed to provide the optimum condition for the desired end use.
Composition (Typical)
HCT Molybdenum Products Data Sheet.pdf
Lanthanated Molybdenum Flat Products Data Sheet.pdf
Pure Molybdenum Products Data Sheet.pdf
Molybdenum "Flat" Calculator