MOLYBDENUM SHEET
Material from .005 inches to .090 inches in thickness is classified as molybdenum sheet. It is used for fabrication of sintering boats, high temperature furnace heating elements and heat shields. Standard availability is described below. Other sizes and tolerances are available.
Thickness |
Max. Width |
.005" to .015" |
24" |
> .015" to .040" |
24" |
> .040" to .090" |
24" |
Length is dependant on surface condition required and width. |
|
Molybdenum Sheet Standard Thickness Tolerance
Thickness |
.25" to 6" |
6" to 12" |
12" to 24" |
.005" - .009" |
± .0005" |
± .0005" |
± .002" |
.009" - .015" |
± .0008" |
± .0009" |
± 10% |
.015" - .020" |
± .0010" |
± .0010" |
± 10% |
.020" - .040" |
± .0015" |
± .0015" |
± 10% |
.040" - .050" |
± .003" |
± .003" |
± 10% |
.050" - .065" |
± .004" |
± .004" |
± .004" |
.065" - .090" |
± .005" |
± .005" |
± .005" |
Molybdenum Sheet Standard Width Tolerance
Thickness |
.25" to 6" |
6" to 12" |
12" to 24" |
.005" - .009" |
± .012" |
± .015" |
± .025" |
.009" - .015" |
± .012" |
± .015" |
± .025" |
.015" - .020" |
± .012" |
± .020" |
± .025" |
.020" - .040" |
± .020" |
± .030" |
± .030" |
.040" - .050" |
± .020" |
± .030" |
± .030" |
.050" - .065" |
± .020" |
± .030" |
± .030" |
.065" - .090" |
± .030" |
± .031" |
± .031" |
Surface Condition
Surface can be supplied in a shiny, matte, satin, or as-rolled condition; dependent upon thickness and width parameters.
Heat Treatment
Molybdenum flat products are rolled and annealed to provide the optimum condition for the desired end use (Furnace, Punch, Deep Draw).
Composition (Typical)
HCT Molybdenum Products Data Sheet.pdf
Lanthanated Molybdenum Flat Products Data Sheet.pdf
Pure Molybdenum Products Data Sheet.pdf
Molybdenum "Flat" Calculator
© Elmet Technologies, 1560 Lisbon Street, Lewiston, ME, 04240, USA. All rights reserved.